How to remove the CapCut watermark (2026)
The CapCut watermark is an end-card: a branded outro appended to exports that use Pro templates or effects. Because it is a separate segment, the free fix is often just trimming the last second off the clip in any editor. When the mark is burned into the frames themselves, a template with a CapCut logo inside the footage, CapCut Pro removes it at the source and HitPaw removes it from finished files.
Which fix applies depends on where the mark sits: at the end of the clip, trim it; on every future export, Pro; inside frames of a file you cannot re-export, a removal tool. The three routes below are in that order.
What CapCut adds
End-card logo added when a project uses Pro templates or effects
- Free tier
- Free templates export clean; Pro assets append the end card
- Best remover
- HitPaw Watermark Remover, 9.1/10
Three ways to remove the CapCut watermark
Ordered by how clean the result is. The official route always comes first when the platform offers one.
Removes the end-card from every export while the plan is active, current and future projects alike. $19.99 a month or $179.99 a year, and the only route that fixes the problem instead of one file.
Try CapCut Pro (opens in a new tab)The end-card is an appended segment, not an overlay. Trimming the final second in CapCut itself, or any editor, deletes it with zero quality loss.
For logos inside the footage, from templates or re-used assets. Rebuilds the area frame by frame with a choice of five modes; the trim trick cannot touch these.
Try HitPaw (opens in a new tab)Remove a burned-in CapCut watermark with HitPaw, step by step
Use this when the mark lives inside the frames: a template logo or a watermark carried over from re-used footage. The steps follow the workflow HitPaw documents for a static video mark: select, pick a mode, preview, export. Full scores in the HitPaw review.
-
Check the export first: trim beats removal
Play your export to the end. If the CapCut branding only appears as an outro after your content stops, close HitPaw and trim it off instead; that route is free and lossless. Continue only for marks visible during the video itself.
-
Load the clip and box the logo
Drag the export into HitPaw’s Video Watermark Remover and draw a selection around the mark with a few pixels of margin. CapCut template marks are static, which makes this the easy case: one box covers the whole timeline.
-
Match the removal mode to the background
Smooth Fill is the documented choice for marks over flat colour, AI mode for footage with motion or texture behind the logo. Vertical template edits usually have busy backgrounds, so expect to use AI mode and preview before exporting.
-
Export at source resolution and verify
Export without changing resolution or frame rate, then check the logo area at full zoom on a few frames with movement. A clean pass here means the repost will survive scrutiny on any platform.
Best tools for removing the CapCut watermark
The three we would use on a CapCut export, rated on the same five criteria as every tool on this site.
Swipe sideways for price, free export and platforms.
| # | Tool | Score | From | Free export | Best for | Runs on | Action |
|---|---|---|---|---|---|---|---|
| 1 |  CapCut ProCapCut Pro | $19.99/mo | Pro templates and effects add an end-card on export | Short-form editors stuck with the CapCut end card | Web, Win, Mac, iOS, Android | Visit CapCut Pro (opens in a new tab) | |
| 2 |  HitPaw Watermark RemoverHitPaw | $12.99/mo | Preview only, exports are locked | Removing logos and text from video | Win, Mac, Web | Visit HitPaw Watermark Remover (opens in a new tab) | |
| 3 |  Media.io Watermark RemoverMedia.io | $9.99/mo | 1 free export per day, watermarked | Browser-only removal with no install | Web | Visit Media.io Watermark Remover (opens in a new tab) |
Why CapCut adds a watermark to some exports
Free projects built on free assets export clean; the end-card appears when a project uses Pro templates, effects or stock, as the visible price of the free tier. It marks the export rather than the footage, which is why it arrives as an appended segment instead of an overlay.
That design is the loophole: an appended segment can be trimmed. CapCut leaves it because most users repost directly without re-editing. The marks that genuinely need a video watermark remover are the ones inside template footage, and those are rarer.
Is it legal to remove the CapCut watermark?
Trimming or cleaning your own edits is normal use of your own content; the end-card is packaging, not a licence condition on your footage. Paying for CapCut Pro is the route CapCut itself intends, and it also licenses the Pro assets properly.
The caveat is the assets, not the mark: exporting a project built on Pro templates without a Pro plan, then stripping the branding, leaves you using premium assets you have not licensed. If the project leans on Pro content and the work is commercial, the plan is the correct fix, not the trim.
Other app watermarks HitPaw clears
Same tool, same method. Each guide opens with the official fix for that app.
Remove the Sora watermark
Animated bouncing logo that moves across every free export
Remove the TikTok watermark
Bouncing username tag on downloaded videos
Remove the Veo watermark
Corner logo plus an invisible SynthID signature
Remove the Filmora watermark
Large centred logo across the whole frame on trial exports
CapCut watermark FAQ
How do I remove the CapCut watermark for free?
If it is the end-card, trim the final second off the export in any editor, including CapCut itself; the branding is an appended segment and cuts away losslessly. Marks burned inside the frames need a removal pass, and no clean free one exists: Media.io runs in the browser, but its free export is 720p with a Media.io mark of its own.
Does CapCut Pro remove the watermark?
Yes. With an active Pro plan, exports drop the end-card entirely, on new projects and on old ones you re-export, and the Pro templates that triggered it become properly licensed. Pro is $19.99 a month or $179.99 a year, read off CapCut’s pricing page on 24 August 2026, and it is the only route that fixes future exports instead of one file at a time.
Why does my CapCut export have a watermark when my friend’s does not?
The end-card is tied to Pro content, not to the app: a project using only free templates, effects and stock exports clean on the free plan. Somewhere in your timeline is a Pro asset; tap it and CapCut labels it. Swap it for a free equivalent and the end-card disappears.
Can I remove the CapCut watermark after exporting?
Yes, and the end-card is the easy case: trim it. A mark inside the footage takes a removal tool; a static template logo is the straightforward case for HitPaw’s select-and-fill workflow. If you still have the project file, removing the Pro asset and re-exporting beats both.
Does TikTok add another watermark on top of CapCut’s?
Yes, they stack: CapCut’s end-card comes from the editor, and TikTok adds its bouncing username tag to any video downloaded after publishing. Handle them separately; the trim removes the first, and the TikTok watermark guide covers the second.
Is it legal to remove the CapCut watermark?
On your own projects, yes; trimming your own export is ordinary editing. The real obligation is the assets: Pro templates used commercially should be licensed through CapCut Pro regardless of whether the branding is visible. This guide does not cover other people’s videos.
Fastest way to clear the CapCut watermark
HitPaw Watermark Remover rates 9.1/10 and has the most complete toolset for marks that move with the footage. Check your CapCut plan first: a higher tier exports without the mark and costs nothing extra.
HitPaw Watermark Remover